Need help?Do you have a question about the GE LOGIQ F Series and is the answer not in the manual?
General| Power Requirements | 50/60 Hz |
|---|---|
| Imaging Modes | B-Mode, M-Mode, Color Doppler, Power Doppler, Tissue Doppler |
| Transducer Frequency Range | 15 MHz |
| Applications | Vascular, Cardiology, Musculoskeletal, Urology |
| Beamformer | Digital Beamformer |
| DICOM Compatibility | DICOM 3.0 |
| Image Storage | USB ports |
Provides an overview of the chapter's content and warnings for safe servicing.
Explains book conventions, hazard icons, and product icons used throughout the manual.
Details crucial human, mechanical, and electrical safety precautions for servicing.
Discusses Electromagnetic Compatibility, Emission, and Electrostatic Discharge prevention.
Outlines procedures for energy control and power lockout during service.
Provides contact details for technical support and service resources.
Introduces requirements for planning and preparing the installation site for the system.
Details environmental and electrical requirements for the ultrasound console.
Specifies purchaser responsibilities and required site features for installation.
Provides information needed to install the unit, including receiving and unpacking.
Offers guidance on installation time, warnings, and acclimation procedures.
Details the procedure for safely receiving and unpacking the ultrasound system.
Covers order verification, physical inspection, and EMI protection.
Describes power on/off procedures and transducer connection.
Outlines system specs, electrical details, and peripheral connections.
Guides on configuring software, options, and network connectivity.
Details the procedure for loading the base system image software.
Explains how to check software version and functional status.
Covers essential documentation and user manuals for installation.
Introduces procedures for checking major functions and diagnostics.
Lists the necessary equipment for performing functional tests.
Details power on/off, date/time checks, and system feature operations.
Explains controls and procedures for B-Mode imaging tests.
Details controls and procedures for M-Mode imaging tests.
Explains controls and procedures for Doppler imaging tests.
Details controls and procedures for Color Flow imaging tests.
Covers procedures for taking distance, depth, and area measurements.
Provides instructions on connecting, activating, and disconnecting probes.
Explains how to use the Cine loop playback and frame navigation features.
Details procedures for backing up and restoring system data and configurations.
Outlines checks for date, time, language, and option settings.
Describes checks for printer and foot switch functionality.
Explains system concepts, component arrangement, and subsystem functions.
Illustrates the overall system hardware block diagram.
Presents a diagram of the system's software architecture.
Describes software modules common across PC backend systems.
Introduces procedures for testing and adjusting the scanner for errors.
Details how to adjust brightness and light settings on the LCD monitor.
Describes tools and software for maintaining image quality and system operation.
Explains how to capture images and system data for analysis.
Details procedures for capturing and saving screen images and configurations.
Covers utilities like disruptive mode and system shutdown.
Guides on setting up network connectivity for system diagnostics.
Introduces procedures for replacing modules and subsystems.
Provides warnings and procedures for disassembly and returning parts.
Details the procedure for replacing the system's air filter.
Explains how to remove and clean the trackball roller.
Describes the process of applying a protective keyboard film.
Outlines procedures for loading base image software for various versions.
Provides an overview of renewal parts for the LOGIQ F Series.
Defines common abbreviations used in the renewal parts section.
Lists renewal parts such as power cords for customer reference.
Shows an illustration of the operator console assembly.
Lists available system user manuals in various languages.
Lists available probes with specifications for the LOGIQ F Series.
Introduces periodic maintenance inspections and the purpose of the chapter.
Explains the importance of keeping records and quality assurance for system upkeep.
Outlines the schedule for customer care and maintenance tasks.
Lists the standard GE tool kit and GE-2 Sears kit contents.
Details specific requirements for care and maintenance tools and supplies.
Covers mains cable inspection and general system cleaning procedures.
Describes tests for outlet wiring, grounding continuity, and leakage current.
Details the procedure for testing chassis leakage current.
Covers testing leakage current and isolation for patient ECG leads.
Explains how to test leakage current from probes.
To Next Page
