GE GBF655 Series User Manual

8 29-5953-2
Getting started
USING THE DISHWASHER
Control Lock You can lock the controls to prevent selections from being made. You can also lock the
controlsafteryouhavestartedacycletopreventcyclechanges.Forexample,childrencannot
accidentally start the dishwasher by pressing buttons with this option selected.
To LOCK the dishwasher control, press the Heated Dry and Wash Temp buttons for 3 seconds
and the lock indicator will appear on the display.
To UNLOCK the dishwasher control, press the Heated Dry and Wash Temp buttons for
3 seconds and the lock indicator will no longer appear on the display.
Start Dishwasher
Start Close the door and presstheStart button to start the cycle or begin the Delay Hours
countdown. The display will turn off if the machine keep standby state 15 minutes. To activate
the display, press any button.
Interrupt
or Pause
To interrupt or pause a dish cycle, slowly open the door. To restart or resume the cycle, close
the door then press Start Cancel
Cancel To cancel a wash cycle, press and hold the Start Cancel button for 3 seconds . The
dishwasherwilldrain and display start to 60 seconds countdown. After draining ,emitabeep
sound,andthemachine enter the standby state.
7
Restart Dishwasher
When the display shows the error codes, press the Delay Start and Cycles buttons at the
same time, the machine will be reset to power on state.
Cycle Indicator Lights and Sounds
8
Sanitized Indicator Ifthesanitizecyclewasselected,sanitizedindicatorwillbeturnonattheendofthe
cycle,iftheNSFrequirementsforsanitizationarenotreached.Thelightwillnotturnon.Certifiedresidential
dishwashers are not intended for licensed food establishments.
ThesanitizecycleisNSFcertified.

GE GBF655 Series Specifications

General

Brand	GE
Model	GBF655 Series
Category	Dishwasher
Language	English