GE GBSC0 - Freezer Door;Drawer Handle Service; Freezer Handle Removal and Attachment

– 16 –
To attach a plastic door handle (on some
models):
Attach the handle to the handle mounting 1.
fasteners by aligning the slots with the handle
mounting fasteners.
Slide handle down until it is fi rmly locked in 2.
position.
A
A
(appearance may vary)
To attach a freezer door or drawer handle
(stainless steel and plastic):
Attach the handle fi rmly to the mounting fasteners
and tighten the set screws on the bottom of the
handle with a 1/8-in. Allen wrench.
Freezer Door or Drawer Handle
To remove a freezer door or drawer handle
(stainless steel and plastic):
Loosen the set screws located on the underside of
the handle with the 1/8-in. Allen wrench and remove
the handle.
Note: If the handle mounting fasteners need to be
tightened or removed, use a 3/16-in. Allen wrench.
A
A
B
B
Slots on back
of handle
Mounting
fasteners