GE GE100 - Handling the Test Strip

GE1 00
GE10 0
GE10 0
23
22
How to handle the GE100 Blood Glucose Test Strip
Inserting the GE100 Blood Glucose Test Strip:
1. Hold the GE100 Blood Glucose Test Strip between your thumb and middle
finger with indication symbol " " facing up.
2. Put forefinger on the side of strip as shown.
3. Insert the GE100 Blood Glucose Test Strip into test strip port until it clicks and
firmly stops.
Removing the GE100 Blood Glucose Test Strip:
1. Hold the GE100 Blood Glucose Test Strip as shown.
2. Rotate the GE100 Blood Glucose Test Strip counterclockwise and pull up
simultaneously.
3. Take the GE100 Blood Glucose Test Strip out of the test strip port. Please follow
your local regulations and discard used strips properly.
NOTE
- Test Strip Port will not be contaminated by blood if you follow the steps
correctly.
Easily Handling the GE100 Test Strip Easily Handling the GE100 Test Strip
GE10 0
1
2
3
1
2
3