Need help?Do you have a question about the GE GFDR270EH and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | GFDR270EH |
| Appliance Category | Dryer |
| Color | White |
| Voltage | 240 V |
| Amperage | 30 A |
| Drum Material | Stainless Steel |
| Control Type | Electronic |
| Number of Cycles | 12 |
| Number of Temperature Settings | 4 |
| Wrinkle Prevention Option | Yes |
| End of Cycle Signal | Yes |
| Energy Star Certified | No |
| Type | Electric |
| Width | 27 in |
| Weight | 120 lbs |
General safety notice regarding the intended audience and liability for repairs.
Lists required safety gear like steel-toed boots, gloves, and safety glasses for repairs.
Outlines the mandatory 6-step process for safely isolating the appliance before disassembly.
Explains how to start/pause cycles and set/recall custom drying cycles using 'My Cycle'.
Provides step-by-step instructions on how to access the dryer's service mode.
Explains how to exit the service mode, either manually or automatically.
Lists available diagnostic tests (Tests 1-13) and their corresponding SSD codes.
Details various error codes (SSD 000-00d), their set conditions, clear conditions, and response actions.
Step-by-step guide for removing the main control panel from the dryer.
Describes the main control board and the process for programming its model ID.
Provides instructions for physically removing the main control board.
Step-by-step guide for removing the dryer drum.
Step-by-step guide for removing the motor.
Details the heater assembly, its components, and location.
Step-by-step guide for removing the electric heater assembly.
Describes the electric high limit thermostat and its removal.
Details the electric inlet thermostat and its removal.
Describes the electric outlet thermostat and its removal.
Explains gas flow, the gas valve assembly, and regulator operation.
Describes the operation of the safety valve and main valve during ignition.
Explains how the flame detector operates during the heating cycle.
Provides guidance for converting the dryer between natural and LP gas.
Step-by-step guide for removing the gas valve assembly.
Details the igniter, its specifications, and removal procedure.
Describes the flame detector and provides its removal steps.
Details the gas high limit thermostat and its removal.
Describes the gas inlet thermostat and its removal.
Details the gas outlet thermostat and its removal.
Details the inlet thermistor, its resistance chart, and removal.
Describes the outlet thermistor, its resistance chart, and removal.
Provides the overall wiring schematic for electric dryer models.
To Next Page
