2
Safety Information
Important Safety Notice
The information in this service guide is intended for use by individuals possessing adequate backgrounds
of electrical, electronic, and mechanical experience. Any attempt to repair a major appliance may result in
personal injury and property damage. The manufacturer or seller cannot be responsible for the interpretation
of this information, nor can it assume any liability in connection with its use.
Warning
To avoid personal injury, follow OSHA Lock-out Tag-out Standard requirements controlling and maintaining
a zero energy state. To perform necessary live power electrical diagnostics, electrical safety personal protec-
tive equipment (PPE) and barriers must be utilized to comply with OSHA electrical safety requirements.
Reconnect all Grounding Devices
If grounding wires, screws, straps, clips ,nuts, or washers used to complete a path to ground are removed for
service, they must be returned to their original position and properly fastened.
GE Appliances
Technical Service Guide
Copyright © 2015
All rights reserved. This service guide may not be reproduced in whole or part in any form without written
permission from the General Electric Company.
To Next Page
Loading...
