GE GFSF6KEXCBB - Leveling the Refrigerator and Doors

Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
I_1 LEVEL THE REFRIGERATOR
The leveling legs hove 2 purposes:
1) Leveling legs adjust so the refrigerator is
firmly positioned on the floor and does not
wobble.
2) Leveling legs serve as a stabilizing brake
to hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
_] Turn the leveling legs clockwise to roise
the refrigerator, counterclockwise to lower it.
FIQt-HeadScrewdriver
_ZiCAUTION: To ovoid possible
personal injurg or propertg damage,
the leveling legs must be firmlg touching
the floor.
[_ LEVELTHE REFRIGERATORDOORS
Remember a level refrigerator is necessorg for
getting the doors perfectlg even. If gou need help,
review the previous section on leveling the
refrigerator.
When
the left
door is
lower
than the
right
doo_
i............
When
the left
door is
higher
than the
right
doo_
Adjustment Adjustment
point point
_] If you open the freezer door, you can see
the center hinge.
r_ Insert the supplied/4 mm Allen wrench into
the shaft of the center hinge.
[_ LEVEL THE REFRIGERATOR
DOORS (cont.)
r_ Adjust the height bg turning clockwise
or counterclockwise. When gou turn
counterclockwise, the door will move up.
r_ After adjusting the doors, insert the supplied
fastener ring using a pair of pliers in the gap
between the hinge grommet and the center
hinge. The number of fastener rings gou will
need to insert depends on the gap.
NOTE: Four fastener rings are enclosed with
the refrigerator. Thickness of each fastener ring
is 0.04".
22