GE GFW400SCK - Pedestal Installation (Washer and Dryer)

– 20 –
Pedestal Installation (Washer and Dryer)
Optional 12 inch high storage drawer pedestals with
dividers are available to provide convenience and
extra storage space for detergent, dryer sheets and
other cleaning supplies. The pedestal installation kit
includes 4 support pads, 4 mounting screws, and 4
leveling legs with locknuts.
Kit Contents
4 Support Pads
4 Mounting Screws
4 Leveling Legs with Locknuts
Tools Needed
Phillips head Screwdriver
9/16" Open End Wrench
or Adjustable Wrench
8 mm Socket Wrench
WARNING: Due to the size and weight of the washer
or dryer, and to reduce the risk of personal injury
or damage, two people are required for proper
installation.
NOTE:
DO NOT remove washer shipping bolts prior to
pedestal installation. Shipping bolts MUST be
reinstalled, if previously removed.
Care should always be taken when laying the
washer or dryer on its side to prevent component
damage.
Do not lay the washer or dryer on its back. Use a
pad or protective surface when laying the washer or
dryer on its side.
Pedestal Installation
1. Lay the washer or dryer on its side.
2. Remove the 4 leveling legs.
Back out and
remove all 4 leveling
legs
(Continued next page)