GE GFWR4800 User Manual (English)

Other manuals for GE GFWR4800

Owner's Manual & Installation Instructions64 pages

Installation Instructions96 pages

Owner's Manual96 pages

Questions and Answers:

D
Donald SmithAug 22, 2025
Why is my GE GFWR4800 Washer not draining, spinning, or agitating?
- S
  Sarah HodgesAug 22, 2025
  If your GE Washer isn't draining, spinning, or agitating, there are several possible causes: * The load might be unbalanced. Try redistributing the clothes and running a drain & spin or rinse & spin cycle. * The pump could be clogged. * The drain hose may be kinked or improperly connected. Ensure the drain hose is straight and the washer isn't sitting on it. * The household drain might be clogged. Check your household plumbing, and call a plumber if needed. * The drain hose might be siphoning because it's pushed too far down the drain. Make sure there's an air gap between the hose and the drain.
A
Aaron DelgadoAug 25, 2025
Why is my GE GFWR4800 Washer making loud noises and vibrating?
- G
  gpooleAug 25, 2025
  If your GE Washer is making loud or unusual noises, vibrating, or shaking, here's what to check: * The washer is designed to move slightly (about 1/4 inch), which is normal. * Ensure all rubber leveling legs are firmly touching the floor and locked in place. Adjust them if necessary. * The load might be unbalanced. Pause the unit, open the door, and manually redistribute the load.
M
Megan Rios DDSAug 25, 2025
Why is water not entering my GE GFWR4800 Washer, or entering slowly?
- N
  Nicholas CarterAug 26, 2025
  If water isn't entering your GE Washer or is entering slowly, consider the following: * The washer performs automatic self-system checks. Water will flow 60 seconds after you press Start. * Ensure both hot and cold water faucets are fully turned on. * The water valve screens might be clogged. Clean the screens in the machine using a brush or toothpick.
K
Kenneth EvansAug 27, 2025
Why is my GE GFWR4800 improperly dispensing softener or bleach?
- M
  Marcia ProctorAug 27, 2025
  If your GE Washer is not dispensing softener or bleach properly: * Clean the dispenser drawer monthly to remove buildup of chemicals. * Make sure you are using the correct amount of softener or bleach and not filling above the max line.
L
Lisa KlineAug 27, 2025
Why is the dispenser drawer in my GE GFWR4800 Washer not dispensing properly?
- P
  Paul MahoneyAug 27, 2025
  If the dispenser drawer in your GE Washer is not dispensing properly, it may be because a laundry detergent packet was placed in the dispenser drawer. Laundry detergent packets should not be used in the dispenser.
D
Deanna ArnoldAug 29, 2025
How to troubleshoot a GE Washer that has no power?
- S
  Shawn BishopAug 29, 2025
  If your GE Washer has no power or isn't working, check these potential causes: * Ensure the washer is securely plugged into a working outlet. * Verify that both the hot and cold water faucets are fully turned on. * Check your house's circuit breakers or fuses. Replace any blown fuses or reset tripped breakers.
K
Kathy TorresAug 30, 2025
What to do if my GE Washer is leaking water?
- G
  Gina ClaytonAug 30, 2025
  If your GE Washer is leaking water, consider these potential causes: * Check the door gasket for damage, ensuring it's correctly seated and not torn. Remember that objects left in pockets (like nails or pens) can cause damage. * The household drain may be clogged. Check your plumbing, and call a plumber if necessary. * The dispenser might be clogged, especially if you're using powder soap. Remove the drawer and clean both the drawer and the inside of the dispenser box. * You might be using too much detergent, leading to oversudsing. Try using less detergent.
S
Shannon JohnstonAug 31, 2025
Why are my clothes too wet after washing in my GE GFWR4800?
- L
  lopezmollyAug 31, 2025
  If your clothes are too wet after a wash in your GE Washer, here are a few things to check: * The load might be unbalanced. Try redistributing the clothes and running a drain & spin or rinse & spin cycle. * The pump could be clogged. * You may be overloading the washer. The dry weight of the load should be less than 16 lbs.
C
Christopher FisherSep 2, 2025
Why is there not enough water in my GE GFWR4800 Washer?
- D
  David McgeeSep 2, 2025
  If it seems like your GE Washer isn't using enough water, note that horizontal washers don't require the basket to fill with water like top-load washers; this is normal.
P
philiphernandezSep 3, 2025
How to get rid of a bad odor inside my GE GFWR4800 Washer?
- S
  Sarah AliSep 3, 2025
  If there's a bad odor inside your GE Washer, it could be due to the washer being unused for a long time, not using the recommended quality of HE detergent, or using too much detergent. Try running a Tub Clean cycle.

GE GFWR4800 Specifications

General

Appliance Category	Washer
Capacity	4.8 cu. ft.
Color	White
Energy Star Certified	Yes
Voltage	120 V
Spin Speed	1300 RPM
Steam Function	Yes
Smart Technology	No
Washer Type	Front Load