GE GFWR4805 - Rear Panel; Rear Panel Removal; Leveling Leg

50
7. Remove the three 1/4” hex head screws on the
bottom of the front panel.
14” Hex
14” Hex 14” Hex
8. Remove the four 1/4” hex head screws on the top
of the front panel.
1/4” Hex
1/4” Hex
1/4” Hex
1/4” Hex
9. Lift the front panel slightly upward and pull for-
ward to remove.
Rear Panel
Rear Panel Removal
1. Disconnect power and water supply to unit.
2. Remove the nineteen 1/4” hex head rear panel
screws and remove the rear panel.
Leveling Leg
Leveling Leg
Jamb Nut
When adjusting or reinstalling the leveling legs,
make sure the jamb nuts are tightened to prevent
vibration.