To Next PageTo Next PageWhat to do if my GE GPV10F does not operate?
If your GE Refrigerator isn't working, first, make sure the control isn't in the OFF position; if it is, move it to a temperature setting. Also, check the fuse and replace it if necessary, or reset the breaker.
General| Brand | GE |
|---|---|
| Model | GPV10F |
| Category | Refrigerator |
| Type | Top Freezer |
| Color | White |
| Energy Star Certified | Yes |
| Door Style | Single Door |
| Freezerless Refrigerator | No |
| Defrost Type | Automatic |
Maintains the temperature in the refrigerator. Setting the control at COOL is the warmest setting.
Helps prevent odors by leaving baking soda in compartments. Clean interior with warm water and baking soda solution.
Defrost when frost is 1/4" thick. Use a plastic scraper. Avoid sharp or metallic instruments.
Do not install near water or direct sunlight. Ensure floor support. Operates in 55°F-110°F (12.7°C-43°C).
Allow 1" sides, 1" top, 2" back for installation and air circulation. 0.5" for hinge side clearance.
Adjust front legs so refrigerator is firm and front is raised for easy door closing.
Follow all steps carefully to reverse door swing. Failure can lead to door falling off.
Connect DC voltage supply lines, ensuring correct wire size and length to prevent voltage drop and overheating.
Check control position and fuse/breaker. Adjust leveling legs if vibration is an issue.
