How to operatethe dishwasher
STEP 1
Load your dishwasher with dishes,
silverware, pots, pans, bowls, etc.
STEP 2
Add detergent to the detergent
dispenser. .
according to instructions on pages
12through 14.
Use rinse aid agent to help prevent
spotting. (See page 10.)
Close and latch the dishwasher door.
POT -
SCRUBBER
CYCLE SELECTOR
9
.ASHmm
NORMAL
m
STEP 3
Select desired wash cycle.
Touch the center of the pad. ● LIGHT WASHis for most loads
s PO’ESCRUBBERis for items
of everydaydishes with light soils
or soils that have not dried on. It
such as pots, pans and casseroles.
Everyday dishes may be included.
saveshot water over the higher
performance cycles, thus saving
● NORMAL WNH is for loads of
energy.
everyday dishes with medium soils.
Designed to yield” “ “ -
c CHINA-CRYSTALis for lightly
on n~rmal loads.
high performance
soiled china and crystal. The fiash
action is softened by pumping air
along with the water to protect your
delicate items. Pre-rinse dishware
before loading. Follow loading
instructions on pages 12through 14.
4
● RINSE & HOLD is for rinsing
partial loads which will be washed
later. Do not use detergent.
Tochange a setting, just touch
desired pad.
Yourdishwasheris nowautomatically
programmed. A number in the
SYSTEMS MONITOR will tell you
how long the cycle will take. (See
pages 7-9.)
.
To Next Page
Loading...
