,-. ,
●
DOOR LATCH
SEL+E:::D TIMETO
“ON” POSITION
ENDOF CYCLE CYCLE PHASE
DRY OPTIONS
I
HEATED
II
ENERGY
~RYING
SAVER
I
--l
./‘
I
SYSTEMS\ MONITOR
\
n
START
r~
CLEAR
irsn
STEP 4
Select a drying option.
● HEATED DRYING provides
faster drying. Can be changed
while cycle is running.
. ENERGY SAVERshuts off
drying heater. Dishes air-dry
naturally. It takes longer, but saves
energy. Youcan prop door open
about 3 inches after motor stops
to speed drying. Excellent for
overnight drying.
Energy Saverhelps reduce electrical
energy used by this model
approximately 7%.
STEP 5
Start the dishwasher.
● When you’re ready to wash
dishes, touch the STARTpad.
There is a time delay between
start-up and water fill so you will
not hear any wash action right
away.Dishwasher will proceed
through your entire program and
turn off automatically.
Tochange a cycle after washing
starts, touch the CLEAR/RESET
pad to cancel cycle. After water is
pumped out and motor stops, you
can reprogram and restart the
dishwasher.
5
.
Systems Monitor
This panel tells you what is
happening in the dishwasher and
can alert you to some possible
problems.
Information displayed:
● Selected wash cycle
● Selected dry option
● Minutes to end of cycle
● Cycle phase, such as WASHING,
RINSING or DRYING
● Diagnostic codes to alert you to
possible problems
See pages 7-9 for explanation of
displays and codes.
To Next Page
Loading...
