How to change color panels
If you are redecorating, you can
panels to match or blend with your
new colors.
The panels are held in place by the
door trim and the trim on the panel
below the door. Each side of each
panel is a different color. Or you
can paint a pane! with the color of
your own choice.
How to chan_e door nanel inse_L_."
1. Take out three trim screws on
either side of the dishwasher door.
Remove the side trim.
'_ _l;d,_ .",n* hath ;noa,,,t nonalo
together.
.1..1[ UI, I.lll_ _I,,UIUI )tUl.l WQ.||L 111 lltJl|L.
(Careful--edges may be sharp.)
_xeplace insert panels, side trim
and screws.
How to change lower panel inserts:
1. Remove four panel attachment
screws. (Two above the panel, two
1.. _1 .... _L ..... 1 -,
2. Remove the entire panel.
3. Takeout three screws and
remove the top trim.
4. Slide out both insert panels
together.
5. Put the color you want in front.
and screws.
/KCpI_IC_. tll_ cntlr_ panel anti _our
attachment screws.
and panel can be replaced by 1/4"
thick wood inserts to match your
kitchen cabinets. Get them from your
nearest cabinet or lumber dealer.
Dimensions for 1/4" wood inserts:
Door Panel: 19_" H × 23_" W.
Lower Pane!: 3_¼6" H x 239/16"
Note: Do not operate dishwasher
while changing panels or when
lower aeces_ panel is removed.
Change color in minutes. Just
remove trim and change.
22
To Next Page
Loading...
Need help?
General
