EasyManuals Logo

GE GTDS825GDMC Dimensions And Installation Information

GE GTDS825GDMC
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
For answers to your Monogram,
®
GE Profile
or
GE
®
appliance questions, visit our website at
geappliances.com or call GE Answer Center
®
service, 800.626.2000.
GTDS820/825GD
GE
®
7.8 cu. ft. capacity gas dryer with stainless steel drum and steam
Specification Created 7/12
370174
Exhaust Option: When viewed from the front
of the unit, exhaust 3-way via rear, left and
bottom. Dryer is shipped exhausted to the
rear. Alternate exhausting knockouts are
supplied.
Gas: An individual, properly-grounded
branch circuit, with a three-prong grounding-
type receptacle, protected by a 15 or 20
amp circuit breaker or a time-delay fuse is
required.
Gas Dryer Electric Rating: 120V, 60Hz, 9A
Gas (BTU/HR): 16,000. Factory-equipped for
natural gas. Tested for LP gas. LP gas supply
requires a conversion kit. Check installation
instructions for correct kit and have a
qualified gas technician install a conversion
kit. See dryer ducting information for proper
installation.
Note: Dryer wall outlet must be located within
36" of service cord entry and accessible when
dryer is mounted in position.
Installation Information: For complete
information, see installation instructions
packed with your dryer.
Dimensions and Installation Information (in inches)
Power Cord Locations 7.8 cu. ft. dryers

Other manuals for GE GTDS825GDMC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE GTDS825GDMC and is the answer not in the manual?

GE GTDS825GDMC Specifications

General IconGeneral
Dryer Capactity7.8 cubic feet
Stackableno
Temperature Controlyes
Control Typeelectronic
Delay Startyes
Child Lockyes
Cycle Signalyes
Interior Lightyes
Drying Rackno
Moisture Sensor Optionyes
Steamyes
Weight and Dimensions IconWeight and Dimensions
Depth31.9 inches

Related product manuals