49-3000187 Rev. 2 11
Getting started
Items to Wash Cycle Wash Temp Soil Level Spin
Selection
(Duration)
Options Available Cycle Details
Water-resistant,
bedding and
bulky items, such
as large coats,
mattress pads,
and bath mats.
Bulky Hot
Warm
Colors
Cool
Cold
Tap Cold
Heavy
Heavy (-)
Normal
Light (+)
Light
Max
++
+
Normal
Off
Auto Soak
Delay Wash
Extra Rinse
Power Clean
Gentle Care
Provides a Deep Fill/max fill wash
water level to wash bulky and
waterproof items. Also incorporates
a Deep Fill rinse to effectively rinse
bulky items and a low spin speed
appropriate for these items. Only
use this cycle for water-resistant,
bedding or bulky items.
Towels
Sheets
Towels /
Sheets
Hot
Warm
Colors
Cool
Cold
Tap Cold
Heavy
Heavy (-)
Normal
Light (+)
Light
Max
++
+
Normal
Off
Auto Soak
Deep Fill
Delay Wash
Extra Rinse
Tangle Control
Power Clean
Gentle Care
Cycle designed washing towels
or sheets, using a higher water
level to effectively clean these
items. It is recommended that
towels and sheets be washed
separately for best care and washing
performance. For waterproof bed
covers use Bulky cycle.
Whites and
household linens
Whites Hot
Warm
Colors
Cool
Cold
Tap Cold
Heavy
Heavy (-)
Normal
Light (+)
Light
Max
++
+
Normal
Off
Auto Soak
Deep Fill
Delay Wash
Extra Rinse
Tangle Control
Power Clean
Gentle Care
Cycle tailored to clean and brighten
your whites.
Various specialty
fabrics
Down-
loaded Refer to SmartHQ App
Specialty cycles selectable through
the SmartHQ App. Defaults to
Active Wear.
Medium to lightly
soiled athletic
wear items of
technical or
synthetic fabrics.
Active
Wear
(Down-
loaded)
Default
Hot
Warm
Colors
Cool
Cold
Tap Cold
Heavy
Heavy (-)
Normal
Light (+)
Light
Max
++
+
Normal
Off
Auto Soak
Deep Fill
Delay Wash
Extra Rinse
Tangle Control
Power Clean
Gentle Care
Default cycle for the Downloaded
cycle position. Cycle designed for
care of medium to lightly soiled
active wear, athletic wear, and
technical fabrics. Incorporates
a dual stage wash period to
effectively treat body soils and
odors.
*Sanitize with Oxi
The Sanitize With Oxi cycle, when using an Oxi additive along with your detergent, is designed to remove 99.9% of bacteria found in
home laundry. Measure the detergent and the Oxi products carefully. Using the amounts appropriate for a large heavily soiled load
in a top load washer, follow the detergent and the Oxi product label instructions. For the Sanitize With Oxi cycle only, add the clothes
first and then place the detergent and Oxi product directly on top of the load. The washer hot water supply connection must provide
a minimum of 120°F to ensure the effectiveness of this cycle.
NOTE: The default Sanitize With Oxi cycle water temperature can NOT be changed.
D
Wash Cycles-Cycle Selector Knob - Models PTW600 and PTW605 only (Continued)
Failure to closely follow these instructions may result in an abnormal vibrating and out-of-balance
condition that could result in physical injury, property damage, and/or appliance damage.
For Waterproof, Water-Resistant, or Bulky:
•
Only use the Bulky (or Delicates) cycle.
•
Using other cycles can cause excessive vibration and may result in injury or damage to the washer, walls, or
floor.
•
Do not mix waterproof and non-waterproof items
.
•
Read the Owner’s Manual for wash cycle details.
WARNING
To Next Page
Loading...
