GE JB645RKSS - USING THE RANGE; SURFACE UNIT OPERATION

49-2000951 Rev. 2 7
Throughout this manual, features and appearance may vary from your model.
How to Set
Push the knob in and turn in either direction to the
setting you want.
A surface ON indicator light will glow when any surface
unit is on
For glass cooktop surfaces:
A HOT COOKTOP indicator light will:
■ comeonwhentheunitishottothetouch.
■ stayonevenaftertheunitisturnedoff.
■ stayonuntiltheunitiscooledto
approximately 150°F.
USING THE RANGE:SurfaceUnits
Surface Units
WARNING
FIRE HAZARD: Never leave the range unattended with the cooktop on medium or high settings.
Keepflammableitemsawayfromthecooktop.Turnoffallcontrolswhendonecooking.Failureto
follow these instructions can result in fire, serious injury or death.
Dual Surface Units and Control Knobs (on some models)
The surface unit has 2 cooking sizes to select from so
you can match the size of the unit to the size of the
cookware you are using.
At both OFF and HI the control clicks
into position. You may hear slight
clicking sounds during cooking,
indicating the control is maintaining
your desired setting.
Be sure you turn the control knob to
OFF when you finish cooking.
Models with a Dual-Ring
surface element only
Melt setting (on some models)
will melt chocolate or butter.