Why isn't my GE JB655 oven clean after a clean cycle?
If your GE Ranges oven isn't clean after a clean cycle, ensure the oven controls were set correctly. Also, if the oven was heavily soiled, clean up heavy spillovers before starting the cycle. Heavily soiled ovens may need to self-clean again or for a longer period.
What does it mean when “F— and a number or letter” flash in the display of GE JB655?
If you see “F— and a number or letter” flashing on your GE Ranges display, it indicates a function error code. Press the Cancel/Off pad and let the oven cool for one hour before putting it back into operation. If the error repeats, disconnect power to the oven for at least 30 seconds, then reconnect it. If the error persists, call for service.
Why GE Ranges oven will not self-clean?
If your GE Ranges oven won't self-clean, it might be too hot; allow it to cool before resetting the controls. Also, ensure the oven controls are properly set.
Why do my GE JB655 Ranges surface units cycle off and on frequently?
Frequent cycling off and on of surface units on your GE Ranges can be due to improper cookware. Use only flat cookware to minimize cycling.
Why does my GE Ranges oven light not work?
If your GE Ranges oven light isn't working, first try tightening or replacing the bulb. If that doesn't work, the pad operating the light may be broken, and you should call for service.
What to do if GE JB655 surface units do not work properly?
If the surface units on your GE Ranges aren't working, first check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if needed. Also, ensure the cooktop controls are correctly set for the specific surface unit you're trying to use.
Why does my GE JB655 surface unit stop glowing when turned to a lower setting?
If your GE Ranges surface unit stops glowing when turned to a lower setting, it is still on and hot. This is normal.
What to do after a power outage and the clock flashes on GE Ranges?
After a power outage causes the clock to flash on your GE Ranges, reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Why is the “DOOR LOCK” light on when I want to cook in my GE JB655?
If the “DOOR LOCK” light is on when you want to cook in your GE Ranges, it means the oven door is locked because the temperature inside the oven hasn't dropped below the locking temperature. Press the Cancel/Off pad and allow the oven to cool.
Why is my GE JB655 Ranges emitting a “burning” or “oily” odor from the vent?
A “burning” or “oily” odor from the vent is normal in a new GE Ranges oven and will disappear over time. To speed up the process, set a self-clean cycle for a minimum of 3 hours.
General| Type | Freestanding |
|---|---|
| Fuel Type | Electric |
| Oven Capacity | 5.3 cu. ft. |
| Cooktop Surface | Smooth Surface |
| Number of Burners | 5 |
| Self-Cleaning | Yes |
| Wi-Fi Connect | No |
| Color | Stainless Steel, White, Black, Black Stainless Steel |
| Burners | 5 |
| Convection | Yes |
| Width | 30 inches |
To Next Page
