7
Using the surface units. GEAppliances.com
Throughout this manual, features and appearance may vary from your model.
Be sure you turn the control knob
to Off when you finish cooking.
How to Set
Indicator Lights
(on radiant glass models only)
A HOT SURFACE or HOT COOKTOP
(depending on model) indicator light will glow
when any radiant element is turned on and
will remain on until the surface is cool
enough to touch.
A SURFACE UNIT on or BURNER ON
(depending on model) indicator light will glow
when any surface unit is on.
NOTE: The SURFACE UNIT or BURNER ON
indicator light may glow between the surface
control settings of Lo and Off, but there is no
power to the surface units.
Push the knob in and turn in either direction
to the setting you want.
At both Off and Hi the control clicks
into position. You may hear slight clicking
sounds during cooking, indicating the control
is keeping the power level you set.
Safety Instructions
Operating Instructions
Safety Instructions Operating Instructions
Care and Cleaning
Troubleshooting Tips
Consumer Support
To Next Page
Loading...
Need help?
General
