28
Care and cleaning of the range.
Painted surfaces include the sides of the
range and the sides of the door trim.
To clean the painted surfaces, use a hot,
damp cloth with a mild detergent suitable for
these surfaces. Use a clean, hot, damp cloth
to remove soap. Dry with a dry, clean cloth.
Do not use steel-wood pads, commercial
oven cleaners, cleaning powders or other
abrasive cleaners. They will damage
the surface.
Painted Surfaces (on some models)
On glass cooktop models, the oven is vented
through an opening at the rear of the
cooktop.
On coil cooktop models, the oven is vented
through an opening under the right rear
surface unit.
Never cover the opening with aluminum foil
or any other material.
Oven Vent
To clean the outside glass finish, use a glass
cleaner. Rinse and polish with a dry cloth.
Glass Window (on some models)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the stainless
steel surface.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to find
the location of a dealer or Mabe Canada
Parts Store nearest you, please call our
toll-free number:
National Parts Center 1.800.661.1616
www.GEAppliances.ca
Stainless Steel Surfaces (on some models)
Consumer Support
Troubleshooting Tips
Care and Cleaning
Operating Instructions
Safety Instructions
To Next Page
Loading...
