33
GEAppliances.ca
Problem Possible Causes What To Do
Food does not Oven is not set to BROIL. •On models with a temperature knob, make sure you
broil properly turn it all the way to the BROIL position. On models
with a BROIL pad, make sure it is turned on.
Door not open to the broil stop •See the Using the oven section.
position as recommended.
Improper rack position •See the Broiling guide.
being used.
Food being cooked in a hot pan. •Use the broiling pan and grid that came with your range.
Make sure it is cool.
Cookware not suited for broiling. •Use the broiling pan and grid that came with your range.
Aluminum foil used on the •See the Using the oven section.
broiling pan and grid has
not been fitted properly
and slit as recommended.
In some areas the power •Preheat the broil element for 10 minutes.
(voltage) may be low.
•Broil for the longest period of time recommended
in the Broiling guide.
Control signals after You forgot to enter a bake •Press the BAKE pad and desired temperature or the CLEAN
entering cooking time temperature or cleaning time. pad and desired clean time.
or delay start
Display flashes "bAd" The installed connection •Contact installer or electrician to correct miswire.
then "linE" with a from the house to the unit
loud tone is miswired.
Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips
Consumer Support
To Next Page
Loading...
