How to stop excessive smoking during the clean cycle of my GE Ranges oven?
If you notice excessive smoking during the clean cycle, it's likely due to excessive soil or grease in the oven. Turn the Oven Temperature Knob to OFF and wait for the oven to cool below the unlocking temperature. Open the windows to ventilate the room, wipe up the excess soil, and then reset the clean cycle.
What does 'F— and a number or letter' mean on my GE JGBS60 Ranges display?
If you see 'F— and a number or letter' flashing in the display of your GE Ranges, it indicates a function error code. Try these steps: * Press the Cancel/Off pad. * Let the oven cool for one hour. * Put the oven back into operation. If the code repeats, disconnect power to the oven for at least 10 seconds, then reconnect. If the error persists, call for service.
What to do if food does not broil properly in my GE Ranges?
If your food isn't broiling correctly, first ensure you've selected the appropriate broil mode. Check the Cooking Guide for proper rack position suggestions. Use cookware specifically designed for broiling. If using aluminum foil on the broil pan, make sure it's tightly wrapped and has slits to allow grease to drain.
How to reduce excessive smoking during broiling in my GE JGBS60?
To reduce excessive smoking while broiling, ensure the food isn't too close to the burner element. Adjust the rack position to lower the food.
What to do if the oven door will not open on my GE JGBS60?
If the oven door won't open, it's likely locked because the internal temperature hasn't dropped below the locking threshold. Allow the oven to cool down until it's below the locking temperature.
What to do if surface burners light but bake and broil burners do not on GE JGBS60?
If the surface burners on your GE Ranges light, but the bake and broil burners do not, the gas to the oven burners may have been shut off. The oven gas shut-off is located on the gas regulator near the gas line attachment to your range. Locate it and flip the lever.
How to fix a GE Ranges oven light that does not work?
If your oven light isn't working, the bulb may be loose or defective. Try tightening or replacing the bulb.
What to do if my GE JGBS60 Ranges oven door will not open when you want to cook?
If your GE range oven door won't open, it's likely locked because the internal temperature hasn't dropped below the locking threshold. Allow the oven to cool down.
What to do if surface burners light, but bake and broil burners do not on my GE JGBS60 Ranges?
If the surface burners light but the bake and broil burners do not, the gas to the oven burners may have been shut off. The oven gas shut-off is located on the gas regulator near the gas line attachment to your range. Locate it and flip the lever to open.
How to reset the clock on my GE JGBS60 after a power outage?
If the clock is flashing due to a power outage or surge, reset the clock. If the oven was in use, you must reset it by pressing the Cancel/Off pad, setting the clock, and resetting any cooking function.
Instructions for installing the anti-tip device to prevent range tipping hazards and ensure user safety.
Essential safety guidelines for using the appliance, including warnings on usage, installation, and maintenance.
Precautions for flammable materials, grease fires, cooktop operation, and preventing burns.
Safety guidelines for oven use, self-cleaning cycles, and proper appliance disposal.
Explanation of oven controls, modes, timer, clock, and special features like temperature adjustment.
Warnings about foil, liners, cookware, and air vents to prevent hazards.
General| Type | Freestanding |
|---|---|
| Fuel Type | Gas |
| Oven Capacity | 5.0 cu. ft. |
| Number of Burners | 5 |
| Convection | No |
| Self-Cleaning | Yes |
| Control Type | Knobs |
| Cooktop Surface | Porcelain |
| Oven Type | Standard |
| Cleaning Type | Self-Clean |
| Burner Type | Sealed |
| Ignition Type | Electronic |
| Cooktop Material | Porcelain |
| Weight | 150 lbs |
| Width | 30 inches |
| Depth | 29 inch |
To Next Page
