30" Sealed Gas Cooktop
Installation
Instructions
CAUTION: Before you begin, read these
instructions completely and carefully.
• IMPORTANT—Save these instructions for
local inspector’s use.
• IMPORTANT—OBSERVE ALL
GOVERNING CODES AND ORDINANCES.
• Note to Installer—Be sure to leave these
instructions with the Consumer.
• Note to Consumer—Keep these
instructions for future reference.
•Note—This appliance must be properly
grounded.
PARTS INCLUDED
1/8" Drill Bit &
Electric or
Hand Drill
Phillips
Head
Screwdriver
Pencil
Ruler or
Straightedge
Saber Saw
2 screws
TOOLS YOU WILL NEED
229C4053P463-2
31-10504-2 (04-03 JR)
1
2 Hold
Down
Brackets
Questions? Call GE Answer Center at 800.626.2000 or visit our
Website at: www.geappliances.com
MATERIALS NEEDED
Foam
Tape
Pipe Wrench
JGP336, JGP930, JGP326
Pipe Fittings
T
e
f
l
o
n
T
a
p
e
F
o
r
U
s
e
W
i
t
h
G
a
s
Pipe Sealant
Shut Off Valve
• IMPORTANT: Leak testing of the appliance
shall be conducted according to the
manufacturer’s instructions.
In the Commonwealth of Massachusetts:
• This product must be installed by a licensed
plumber or gas fitter.
• When using ball-type gas shut-off valves,
they shall be the T-handle type.
• A flexible gas connector, when used,
must not exceed 3 feet.
To Next Page
Need help?
General
