The timeCddng fi?atw$?WNVs
you
to presetthe ‘cookingtime.
The oven shutsoff automatically.
PowerLevel 10(HIGH) is
recommended for most cooking,
butyou may change this for more
i3exibiMy.Seeyour Cookbook.
TObecome better acquainted with
time cooking, make a cup ofcoffee
byfollowing the stepsbelow.
StSp 1: Fill a cup 2/3 full of
water and add 1 teaspoon ofinstant
coffee and stir to dissolve. Use a
cup that has no metal decoration
and is microwave safe. Place cup
in oven and close door.
Step 2: Touch TIME COOK pad.
Dispkryshows: Oand “POWER 10~’
“ENTER COOK TIME” flashes.
Step 3: Select your time. Touch 1
and MIN pad for one minute.
Display shows 1:00 and “POWER
H):’“COOK TIME” flashes.
If another power levelis desired,
touch POWER.LEVEL pad and
desired number, althoughPower
Level 10(HIGH) is preferred for
this cup of coffee.
Step 4: Touch START.“COOK
TIM13j’“POWER KIJ’and time
countingdown showon display.
Step 5: When time is up, the oven
signalsand flashes “End~’Oven,
light and fan shut off.
Step 6: Open the door.
t ‘ c
With the T’imeCook H feature, you
can set two time cooking fi.mctions
within one program. This would
be ideal if you desired to change
power levels during your cooking
operations.
The followingis an exampleofhow
to change power levelsusing Time
Cook II.
Step 1: Repeat Steps 1,2 and 3.
Step2:TouchTIME COOK.
Step 3: Set your time.
Step 4:
Tochangethe power level,
touch POWER LEVEL pad and
desirednumber for newpowerlevel.
Step 5: Touch START.
Step 6: “POWER W’ is displayed
and “CXXIKTIME” 1 countsdown.
Step ‘7:At the end of “COOK
TIME” 1the next selected power
levelis displayed and “COOK
TIME” 2 is showncounting down.
Step 8:
Whentime is up, the oven
signals and flashes “BNX’The
oven, light and fan shutoff.
Step 9: Open the door.
Q. I set my mum
forthe time
calBed
forinthe recipe, but atthe
endofthetimeahved, mydish
wasn’tdone.Whathappened?
A. Since house power varies due
to time or location many Time
Cook recipes giveyou a time range
to preventovercooking. Setthe
ovenfor minimum time, test the
food for doneness, and cook your
dish a little longer,if necessary.
Q. I touched the number
pads
andsekctedmypowerkwel.When
ItouchedSTART,howevq my
ovendidn’tcomem. Whynot?
A. The TIME COOK pad must be
touched before setting the number
pads or else youroven will not
begin cooking.
Q. I
wanttocookonapower
k!velotherthanHIGH.Whatdo
I needtodo?
A. To change the power level,
touch the POWER LEVEL pad.
“ENTER POWER.”flashes on the
displaypanel. Enter new number, .
Q.
CanI interruptmyTime
cook functiontocheckthefood?
A. Yes.TOresume cooking,
simply close the door and press
the STARTpad. The timer must be
reset for cooking to resume unless
time is remaining on timer.
To Next Page
Loading...
Need help?
General
