GE Monogram ZDI15 Use And Care Guide

Reversing the Door Swing
Icemaker
To replace door on hinges:
1. Place plastic hinge sleeve on bottom hinge
and position the door on the pin.
2. Place plastic hinge sleeve in the top hinge
hole on the door. Align the door on the
bottom hinge and replace the top hinge pin.
3. Replace the handle and handle screws.
To reverse the door catch:
1. Remove the plugs buttons from the opposite
side of the door.
2. Remove the screws from the magnetic door
catch and replace it on the opposite side of
the door.
3. Push the plug buttons into place on the
opposite side of the door.
19
Reverse
Door Catch
Position
To reverse
the door

GE Monogram ZDI15 Specifications

General

Brand	GE
Model	Monogram ZDI15
Category	Ice Maker
Language	English