QUICKSTART GUIDE
MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE 45
Z To create a new tag based VLAN to which to assign ports 21 and 23,
first click on the Add pushbutton.
A screen will open that will allow you to configure a new tag based VLAN.
Z Within this screen enter the new VLAN ID number (or tag) and the
name of the VLAN.
We will use a tag of 2 and a VLAN name of GOOSE2.
Z Left mouse click on the check boxes corresponding to ports 21 and
23 to add them to this new VLAN.
Z Select Save.
Z OK to exit.
To Next Page
Loading...
