Need help?Do you have a question about the GE Cync and is the answer not in the manual?
General| Type | Smart Switch |
|---|---|
| Color | White |
| Connectivity | Wi-Fi |
| Platform Compatibility | Google Assistant, Amazon Alexa |
| Voltage | 120V |
| Brand | GE |
| Control Method | App, Voice |
| Load Type | Incandescent, LED |
Locate and turn off the circuit breaker that controls the power to the switch location.
Test the existing switch to confirm that power has been completely cut off.
Use a voltage tester on wires to ensure no electrical current is present before proceeding.
Label each wire with the provided labels to ensure correct reconnection later.
Connect the switch's neutral wire to the corresponding neutral wire from the wall.
Connect one of the switch's black wires to the line wire from the wall.
Connect the remaining black wire on the switch to the load wire from the wall.
Restore electrical power to the switch location via the circuit breaker.
To Next Page
