Need help?Do you have a question about the GE C-Start and is the answer not in the manual?
General| Type | Smart Switch |
|---|---|
| Connectivity | Wi-Fi |
| Voice Control | Amazon Alexa, Google Assistant |
| Voltage Rating | 120V AC |
| Current Rating | 15A |
| Poles | Single Pole |
| Standards | UL Listed |
Crucial safety advice regarding electric shock during installation.
Overview of the three main steps for setting up the smart switch.
Details electrical ratings, wiring needs, and bulb compatibility for the switch.
Lists included components, required tools, and estimated installation time.
Safely disconnect power at the circuit breaker box before installation.
Remove the existing switch, confirm power is off, and label wires.
Connect the switch wires to the corresponding wall wires using wire nuts.
Neatly push the connected wires back into the wall box.
Mount the switch to the wall and attach the faceplate.
Restore power and verify the switch light ring indicates setup mode.
Explains light ring behavior and basic troubleshooting for non-functioning lights.
Guide to downloading the app, adding the switch, and setting up voice assistants.
Specific instructions for connecting with Amazon Alexa and Google Assistant.
Statement regarding FCC rules and potential interference.
Information on RF exposure limits and cautionary advice for installation.
To Next Page
