Need help?Do you have a question about the GE 45609 and is the answer not in the manual?
Power| voltage | 120 VAC |
|---|---|
| frequency | 60 Hz |
Signal| signal frequency | 908.42 MHz |
|---|---|
| range | Up to 100 feet |
Capacity| maximum load (incandescent) | 600W |
|---|---|
| maximum load (motor) | ½ HP |
| maximum load (resistive) | 1800W |
| maximum load (amperage) | 15A |
Operating Environment| operating temperature range | 32-104° F |
|---|---|
| operating temperature range (Celsius) | 0-40° C |
Exercise caution when controlling appliances to avoid hazardous conditions due to unintended activation.
Details the expected range and factors affecting wireless communication.
Diagram illustrating wiring for a single switch setup.
Schematic for connecting the switch in a 3-way configuration.
Schematic for connecting the switch in a 4-way configuration.
Guidance for installing the switch in multi-gang electrical boxes.
Critical safety instructions to prevent electrical shock during installation.
Specifies required wire gauges for different connections (HOT, Load, Ground).
Recommended insulation strip length for screw terminals and enclosure holes.
Explanation and operation of the air gap switch for disconnecting power.
Operating the switch manually or via a Z-Wave remote.
Steps to include or exclude the switch from the Z-Wave network.
Configuration options for responding to All On/All Off commands.
Details on configuring the LED indicator's behavior.
To Next Page
