QUICKSTART GUIDE
MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE 47
Z Select OK to start VLAN 2.
You will notice that VLAN 2 is now active, and ports 21 and 23 are part of this VLAN. Ports
21 and 23 have been removed from the default tagged based VLAN1.
You can add ports 21 and 23 back into the default tagged based VLAN 1 if you wish, such
that they are part of both VLAN 1 and VLAN 2.
To do this,
Z Select the configure icon for the default tagged based VLAN1.
To Next Page
Loading...
