GE MultiNet - Features

MULTINET SERIAL TO ETHERNET CONVERTER – INSTRUCTION MANUAL 1
MultiNet
Serial to Ethernet Converter
Instruction Manual
GE
Grid Solutions
Instruction Manual
1. Features
• Converts Modbus
®
RTU over RS485 into Modbus
®
TCP/IP over Ethernet.
• Supports both 10BaseT Ethernet and 10BaseF fiber connections.
• Connect up to 32 RS485 serial devices to an Ethernet network.
• Modbus
®
TCP/IP allows multiple SCADA masters to simultaneously connect and
communicate to the same IED.
• The Multinet-FE is specifically designed for use with the PQMII and other GE serial
Modbus IEDs and deployed for use in an Electrical utility or Substation as part of a
Large Scale Fixed Installation (LSFI).
• Simple "plug and play" device setup with EnerVista software.