GE MVAX 11 User Manual

STANDARD SAFETY STATEMENTS AND EXTERNAL LABEL INFORMATION FOR
General Electric EQUIPMENT
1. INTRODUCTION
This Safety Section and the relevant equipment documentation provide full
i
nformation on safe handling, commissioning and testing of this equipmen
t.
T
his Safety Section also includes reference to typical equipment label
markings.
The technical data in this Safety Section is typical only, see the technica
l
data section of the r
elevant equipment documentation for data specific to
a particular equipment.
B
efore carrying out any work on the equipment the user
should be familiar with the contents of this Safety Section
and the ratings on the equipment’s rating label.
Reference should be made to the external connection diagram before the
equipment is installed, commissioned or serviced.
Language specific, self-adhesive User Interface labels are provided in a bag
for some equipment.
2. HEALTH AND SAFETY
The information in the Safety Section of the equipment documentation is
intended to ensure that equipment is properly installed and handled in
order
to
maintain it in a safe condition.
It is assumed that everyone who will be associated with the equipment will
be familiar with the contents of this Safety Section, or the Safety Guid
e
(S
FTY/4L M)
.
When electrical equipment is in operation, dangerous voltages will be
present
in certain parts of the equipment. Failure to observe warnin
g
noti
ces, incorrect use, or improper use may
endanger personnel and
equi
pment and also cause personal injury or physical damage.
Before working in the terminal strip area, the equipment must be isolated.
Proper and safe operation of the equipment depends on appropriate
shi
pping and handling, proper storage, installation and commissioning, and
on careful operation, maintenance and servicing. For this reason only
qualified personnel may work on or operate the equipment.
Qualified personnel are individuals who:
 Are familiar with the installation, commissioning, and operation of the
equipment and of the system to which it is being connected;
 Are able to safely perform switching operations in accordance with
accepted safety engineering practices and are authorized to energize
and de-energize equipment and to isolate, ground, and label it;
 Are trained in the care and use of safety apparatus in accordance with
safety engineering practices;
 Are trained in emergency procedures (first ai
d).

GE MVAX 11 Specifications

General

Brand	GE
Model	MVAX 11
Category	Relays
Language	English