GE OEC 9800 Plus - Image Washed Out Due to Metal Troubleshooting; Image Appears Blurry (Lag) Troubleshooting

Image appears
washed out because
of metal in the eld
1. USE SMART METAL (p. 3-10,
of Operators Manual)
2. MANUALLY ADJUST
BRIGHTNESS / CONTRAST
(p. 3-10, of Op Man.)
Image appears
blurry (lag)
CAUSED BY MOTION /
BREATHING, REDUCE NOISE
FILTER
Problem:
Solution:
Problem:
Solution:
For each situation referenced, use the rst recommended step then take an image. If the quality is still not sucient move on to recommended step #2. Repeat for as many steps as necessary to obtain a clear image.