GE OEC 9800 User Manual

OEC 9800 Installation Procedure
1
Service
Periodic
Contents
Schematics
Illustrated
Installation
Contents
Overview.........................................................................................................................................................................3
Unpacking the System ..................................................................................................................................................3
Depalletization Performed By .......................................................................................................................................4
Installation Report .........................................................................................................................................................5
C-Arm Damage Inspection ...........................................................................................................................................5
Workstation Damage Inspection...................................................................................................................................5
Inventory of Customer Items.........................................................................................................................................6
C-Arm Items ..............................................................................................................................................................6
Workstation Items......................................................................................................................................................6
Optional Equipment...................................................................................................................................................6
Installation Procedures .................................................................................................................................................6
Cover Removal, Internal & Cable Inspection, Partial Setup..........................................................................................7
Mechanical Checks.....................................................................................................................................................10
The Power Cord Assembly .........................................................................................................................................10
Isolation Transformer Strapping .................................................................................................................................12
Power ON System ......................................................................................................................................................16
Line Voltage Regulation..............................................................................................................................................20
C-Arm Control Panel and Foot/handswitch Check .....................................................................................................21
Workstation Keyboard Check .....................................................................................................................................24
Backup the Configuration Files...................................................................................................................................25
Options .......................................................................................................................................................................26
Cine Archive Disk Test ............................................................................................................................................26
High Capacity Disk Test ..........................................................................................................................................26
VCR Test.................................................................................................................................................................26
IR Transmitter Test..................................................................................................................................................26
Digital Hardcopy Camera test..................................................................................................................................27
Instant Film/Paper (Onboard) Printer.......................................................................................................................27
Thermal Printer Test................................................................................................................................................27

GE OEC 9800 Specifications

General

Type	Mobile C-arm
Digital Imaging	Yes
X-Ray Tube Type	Rotating anode
Frame Rate	30 fps
Pulse Mode	Yes
Last Image Hold	Yes
Roadmapping	Yes
Image Intensifier Size	9 inches
Imaging Modes	Fluoroscopy, Digital Subtraction Angiography
kV Range	40-120 kV
Focal Spot Size	0.3 and 0.6 mm
Maneuverability	Motorized
Monitors	Dual monitors
Weight	Approximately 1, 100 lbs (500 kg)

Summary

Unpacking the System

Depalletization Performed By

Installation Report

C-Arm Damage Inspection

Inspect the C-Arm for damages and record information in the 9800 Installation Report/Checklist.

Workstation Damage Inspection

Inspect the Workstation for damages and record information in the 9800 Installation Report/Checklist.

Installation Procedures

Cover Removal, Internal & Cable Inspection, Partial Setup

Inspect cables and internal components after removing covers, observing safety procedures.

Mechanical Checks

Verify the full range of motion for C-Arm and Workstation mechanical components.

The Power Cord Assembly

Isolation Transformer Strapping

Select correct tap voltage for isolation transformer input based on measured wall voltage.

Power ON System

Steps to power on the system and verify initial boot, fan operation, and elapsed time meter.

Line Voltage Regulation

Measure wall outlet voltage before and during X-ray exposure to calculate line voltage regulation.

C-Arm Control Panel and Foot/handswitch Check

Verify C-Arm control panel functions, image orientation, and foot/handswitch operations.

Workstation Keyboard Check

Backup the Configuration Files

Cine Archive Disk Test

High Capacity Disk Test

DICOM

9800 FluoroTrak™

Radiographic Beam Alignment Test

Film Exposure

Check film processor availability, then perform specific X-ray exposures for beam alignment.

50 mm x 50 mm Field Verification

Centering

Normal Field Verification

MAG1 Field Verification

MAG2 Field Verification

Pass or Fail

Reporting

Reporting for Domestic Systems

Reporting for International Systems