GE OEC 9800 - Cine Archive Disk Test; High Capacity Disk Test

OEC 9800 Installation Procedure
26
Service
Periodic
Contents
Schematics
Illustrated
Installation
Options
Refer to the 1k x 1k Workstation or Series 9800 C-Arm Operator’s Guide for operating instructions if necessary. Check the
appropriate boxes in the corresponding section of the Report/Checklist. Ignore any following sections that are non-applicable to
the system.
Cine Archive Disk Test
1. Verify that a cine run can be recorded to the hard disk.
2. Verify the recorded run can be played back.
High Capacity Disk Test
1. Using the Image Directory verify that dynamic and static image(s) can be saved to disk.
VCR Test
1. Verify the VCR RECORD function.
2. Verify the VCR PLAY function.
IR Transmitter Test
1. Press the Remote Control Screen key and verify that the remote control screen displays on the monitor.
2. Use the cursor control to move the cursor to an executable button and press the ENTER key.
3. Press the EXIT key to exit.