To Next PageTo Next PageWhat to do if my GE Datex-Ohmeda S/5 is not working?
If your GE Medical Equipment is not functioning, try these steps: First, unplug and then re-plug the Remote Controller Cable, ensuring the cable is undamaged. Next, unplug and re-plug the Power Cord, also checking for any damage to the cord. Finally, verify that all fuses are intact.
How to fix a GE Datex-Ohmeda S/5 Medical Equipment plug-in module that is not working?
If a plug-in module on your GE Medical Equipment isn't working, try removing and then reinserting the module. Also, ensure that the parameters you want to see are configured to be displayed.
Why is my GE Medical Equipment Compact Airway Module not functioning?
If the Compact Airway Module on your GE Medical Equipment isn't working, check the following: Make sure that messages like ‘Occlusion’ or ‘Calibrating Gas Sensor’ are not displayed. Ensure that both a D-fend water trap and a sample tube are properly attached. Verify that the parameters you want to view are configured for display. As a last resort, try removing and reinserting the module.
General| Model | S/5 Series |
|---|---|
| Power Supply | 100-240 VAC, 50/60 Hz |
| Category | Medical Equipment |
| Manufacturer | GE Healthcare |
| Display Type | Color LCD |
| Weight | Approximately 10 kg (varies by configuration) |
| Monitoring Parameters | ECG, SpO2, NIBP, Respiration, Temperature, Invasive Blood Pressure (IBP), Cardiac Output, Agent Monitoring |
| ECG | Yes |
| SpO2 | Yes |
| NIBP | Non-invasive blood pressure monitoring |
| Respiration | Yes |
| Temperature | Yes |
| Invasive Blood Pressure (IBP) | Yes |
| Cardiac Output | Yes |
| Agent Monitoring | Yes |
| Ventilation Modes | N/A (Patient Monitor, not a ventilator) |
| Gas Delivery | N/A (Patient Monitor, not a ventilator) |
| Alarms | Audible and visual alarms, configurable alarm limits |
| Connectivity | Yes |
| Networking | Yes |
| Recorder | Yes |
| Battery Backup | Yes |
Provides information about the manual's purpose, audience, and conventions.
Introduces the monitor's modular design, upgradeability, and optional components.
Provides physical, electrical, and environmental specifications for the monitor and display unit.
Describes the Datex-Ohmeda monitors' modular system architecture and bus structure.
Explains the general bus structure of the S/5 system, including CPU and module buses.
Guides the user through the process of installing the monitor and its components.
Describes the mounting of the S/5 Compact Monitor frame to various stands.
Explains how to interface external devices with the S/5 Compact Monitors.
Details connecting external monitors using the E-INT/M-INT Interface Module.
Provides procedures for performing functional checks on the S/5 monitors.
Outlines detailed functional inspection procedures for various monitor components.
Covers general functional checks for the monitor, including power and startup.
Provides a general troubleshooting flowchart for common monitor problems.
Presents a flowchart for troubleshooting software-related issues.
Provides instructions for planned maintenance (PM) to be performed annually.
Introduces planned maintenance procedures for the S/5 monitors.
Lists recommended tools for calibrations and adjustments to ensure accuracy.
Outlines the checklist for planned maintenance procedures.
Details visual inspection and preparation steps before maintenance.
General visual inspection and preparation steps, including handling PC boards and checking fuses.
Provides access to monitor service menus for diagnostics and configuration.
Describes common service menus related to the monitor frame.
Covers various measurement parameters and their configurations in service menus.
Lists replaceable parts for the S/5 Compact Monitor Display Unit.
Lists replaceable parts for the S/5 Compact Monitor Frame.
