GE Datex-Ohmeda S/5 Series - Wlan

Datex-Ohmeda S/5 Compact Anesthesia and Compact Critical Care Monitors
8
Document no. M1144955-001
1.2.4 WLAN
Driver: WLAN driver chip name.
Connection indicates the state of the WLAN
connection.
Ethernet Addr: Ethernet address of the WLAN card
used.
AP MAC: Ethernet address of the access point
where the monitor is currently connected.
Signal Quality indicates the quality of the radio
signal between the monitor and the access point
(0…100%).
Channel is the WLAN channel configured to the
access point where the monitor is currently
connected.
Speed indicates the current communication speed
with the access point.
RoamCounter Occurred roamings between
access points.
Reset Counter *
Network ID: Identifies the WLAN network used.
Firmware version: *
Firmware date: *
Statistics (Packets, Bytes, Errors, Fails, Buffer)
shows the WLAN communication related statistics.
* WLAN PCMCIA card related information