GE Datex-Ohmeda S/5 Series - 6 General troubleshooting; 6.1 Software troubleshooting chart

Functional check
55
Document no. M1144951-004
NOTE: * Ensure that the calibration gas and regulator are functioning properly before
calibration. Perform annual maintenance on the regulator as required. For more information
see section “Adjustments and calibrations” in Compact Airway modules slot in E-Modules
Technical Reference Manual.
For details on recommended accessories see “Supplies and Accessories” catalog.
5.1.1 Hemodynamic patient simulators
The following tables present the patient simulators’ compatibility with each hemodynamic
module, and the accessories needed:
Table 14 Patient simulators’ compatibility with each hemodynamic module
Tonometry Module, E-TONO/
M-TONO
Calibration gas and regulator 755580/755534*
Sampling line 733251
Tonometrics
TM
catheter
TONO-14F or another suitable
TONO-_F catheter
Luer plug
Pressure manometer
BIS Module, E-BIS/ M-BIS BIS simulator or
BIS Sensor simulator
900509
900508
E-ENTROPY/ M-ENTROPY Entropy simulator N-ES
Entropy sensor cable 8002964
MemCard option MemCard – Data or Menu 893860 (Menu, English)
887045 (Data, English)
Module Parameter
Patient simulator
M1010831 MedSim 874027
E-PSM(P), E-PRESTN ECG Ok Multilink ECG acc. Not compatible
T 402015-004 402015-004 and
M1010832
InvBP Ok M1010858
For product(s) Tool Order No.
ECG