GE SENOGRAPHE DMR+

Technical
Publications
0459
5128689–2–100
Revision 1
SENOGRAPHE DMR+
om
Operator Manual
do not duplicate
Copyright
E
2005 GE Medical Systems
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).

GE SENOGRAPHE DMR+ Specifications

General

Brand	GE
Model	SENOGRAPHE DMR+
Category	Medical Equipment
Language	English

Summary

Chapter 1: Introduction

Section 1: Presentation

Provides an overview of the SENOGRAPHE DMR system and its primary use.

Section 2: Description

Details the main components of the SENOGRAPHE DMR system.

Chapter 2: Preparing an Examination

Section 1: Preparing the Equipment

Outlines steps to prepare the imaging receptor, focal distance, and compression paddle.

Section 2: Patient Positioning

Provides guidelines for correctly positioning the patient for mammographic exams.

Section 3: Exposure Mode

Explains the Automatic Optimization Parameters (AOP), AEC, and Manual exposure modes.

Chapter 3: Maintenance

Section 1: Cleaning & Disinfection

Details procedures for cleaning and disinfecting patient contact surfaces and equipment.

Section 2: Preventive Maintenance

Outlines the maintenance program, frequency, and procedures for the equipment.

Section 3: Messages

Lists and explains system messages, fault codes, and their corrective actions.

Chapter 4: Specifications

Section 1: Physical Specifications

Provides physical dimensions, space requirements, and weights of system components.

Section 2: Technical Specifications

Covers electrical specifications, generator output, kVA load, input impedance, and filters.

Section 3: Environment

Specifies the required ambient conditions for operation and storage.

Section 4: Meaning of Symbols

Explains the meaning of various safety and operational symbols used in the manual.

Chapter 5: Regulations