Datex-Ohmeda S/5 Compact Anesthesia and Compact Critical Care Monitors
38
Document no. M1144951-004
4.2 Interfacing external bedside devices via Device
Interfacing Solutions, N-DISxxx
The Device Interfacing Solution, N-DISxxx provides means for transferring physiological,
waveform and event data from various bedside patient care devices to the Datex-Ohmeda
monitoring system. The real-time and trended data can be displayed on the monitor screen
and used for record keeping purposes. The interfacing module reads the data coming from the
external device, converts it to a suitable format and sends it to the monitor.
See the following table of DIS modules and devices that you can interface with the Device
Interfacing Solution.
NOTE: The Device Interfacing Solution (DIS) is only compatible with the S/5 Compact Anesthesia
and S/5 Compact Critical Care Monitor when the monitor has S/5 Monitor software of rev. 02 or
later installed.
Table 6 DIS modules and interfaced devices
Device Ventilators
N-DISEV4
Evita 4
1
1 Trademark of Dräger Medical AG & Co
N-DISPRIM
Primus
1
NOTE: Not available in the US
N-DIS7200
7200 Series Ventilator System
2
2 Trademark of Nellcor Puritan Bennet Inc
N-DIS840
840 Ventilator System
2
N-DISS300
Servo Ventilator 300
3
3 Trademark of Maquet Critical Care AB part of the Getinge Group (previously trademark of Siemens)
N-DIS7900
7900 SmartVent Ventilator
4
4 Trademark of GE Healthcare Finland Oy
N-DISAEST
5
5 Replaced by N-DISVENT
Aestiva/5
4
N-DISVENT
S/5 Aespire
4
Aestiva/5
4
Aisys Carestation
4
S/5 Avance
4
Centiva/5
4
Engström Carestation
4
Device Monitors
N-DISOXIM3
Oximetrix 3
1
N-DISQVUE
QVue /Q2
1
N-DISA2000
A-2000 Bispectral Index Monitoring System
2
N-DISVIGIL
Baxter-Vigilance
3
N-DISPICCO
PiCCO-Technology
4
NOTE: Not available in the US
N-DISRGM
RGM Monitor
5
To Next Page
Loading...
