Error, event, alarm and maintenance data is stored in Service Log.
The service log contains information about the occurred monitor errors, events and alarms since the last
factory reset or service log reset. The service log is saved in the EEPROM memory of the main CPU board. The
user can also store different maintenance events in the maintenance log.
Maintenance menu is for setting and viewing the
maintenance information of the monitor.
Error History is for selecting the error history view
onto the right side of the menu.
Event History is for selecting the event history view
onto the right side of the menu.
Alarm History is for selecting the alarm history view
onto the right side of the menu.
Scroll Last Er (Ev) is for scrolling the error / event /
alarm information on the right side of the menu.
Scroll Counters is for scrolling the error / event /
alarm counters on the right side of the menu.
Record Data is for recording the service log
information onto the recorder.
Reset Log is for clearing up the content of the
service log. This function should be run after a
performed maintenance. In Error/Event history view,
the Reset Log command clears up both the error and
the event log. In the Alarm History view, the Reset
Log command resets only the alarm history log.
To Next Page
Loading...
