Datex-Ohmeda S/5 Compact Anesthesia and Compact Critical Care Monitors
12
Document no. M1144956-003
2.7 Wireless LAN
Datex-Ohmeda Wireless Network is an extension to, or an alternative for, a wired Datex-
Ohmeda Network. It provides same network services than the wired Datex-Ohmeda Network.
The monitor network is a local area network based on standard Ethernet technology. The 
monitor network is formed by connecting one Central and up to 32 bedside monitors together 
with LAN network. 
The communication protocol for the monitor network is Datex-Ohmeda specific.
Wireless bedside monitors can use both the wired and wireless network. If the network cable is 
connected, the wired Datex-Ohmeda Network is used.
For using Wireless LAN connection, the monitor requires Spectrum24 High Rate Wireless LAN 
antenna card.
For configured parameters please refer to the Datex-Ohmeda Network, Wireless LAN 
Installation Guide.