EasyManua.ls Logo

GE Optima CT680 Series - User Manual

GE Optima CT680 Series
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATING DOCUMENTATION
5472001-1EN
Rev. 6
Optima CT680 Series and Optima CT670
Installation Manual
(Book 1 of 2)

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the GE Optima CT680 Series and is the answer not in the manual?

GE Optima CT680 Series Specifications

General IconGeneral
BrandGE
ModelOptima CT680 Series
CategoryMedical Equipment
LanguageEnglish

Summary

Important Precautions and Safety Guidelines

X-Ray Protection Guidelines

Information on safe use of X-ray equipment and necessary training.

Radioactive Material Handling and Lithium Battery Safety

Guidelines for handling radioactive materials and lithium batteries.

Preface and Publication Conventions

Safety and Hazard Information

Details safety symbols, hazard types, and their meanings.

Chapter 1 Position Subsystems Installation

Gantry Leveling and Bearing Inspection

Procedures for leveling the gantry and inspecting its bearing gap.

Table Installation Procedures

Comprehensive guide for installing the GT1700V and Lite tables.

Drilling Anchor Holes and Anchoring

Procedures and safety guidelines for drilling anchor holes for system mounting.

Chapter 2 Power, Ground & Interconnect Cables

Gantry Cable Connections

Procedures for connecting various cables to the gantry power pan and TGPG.

PDU Cable Connections and Configuration

Guide for connecting and configuring PDU cables, including panel and breaker setup.

Chapter 3 System Continuity & Ground Checks

System Continuity Verification Procedures

Procedure for verifying system continuity and resistance checks using a digital VOM.

Site Ground Continuity Checks

Steps to verify site ground continuity between various system components.

Chapter 4 System Covers: Installation & Alignment

Electrical Power On & Ground Checks

Procedures for powering on the system, verifying ground connections, and checks.

Appendix A Gantry Cover Removal and Dolly Setup

Appendix C Operating Table Installation and Adjustment

Related product manuals