GE Optima CT680 Series - Section 14.0 Install Table Footswitch Assembly (Lite Table); Time and Personnel; Tools and Test Equipment; Procedure

GE COMPANY
DIRECTION 5472001-1EN, REVISION 6OPTIMA CT680 SERIES AND OPTIMA CT670 INSTALLATION MANUAL
Chapter 1 - Position Subsystems Page 89
1 – Pos. Subsystems
Section 14.0 Install Table Footswitch Assembly (Lite Table)
14.1 Time and Personnel
14.2 Tools and Test Equipment
• Standard Install Tool Kit
14.3 Procedure
Install the table foot-switch assembly as shown in Figure 1-71, along with filler strip.
1.) Connect foot-switch cables.
Figure 1-71 Install Table Foot-switch
2.) Install front bottom cover and footswitch pedals.
Required Persons Preliminary
Reqs
Procedure Finalization
1 (FE or mechanical supplier) 1.0 hour labor on-site
Connect
Footswitch
Cables