Need help?Do you have a question about the GE Healthcare Optima XR200amx and is the answer not in the manual?
General| Manufacturer | GE Healthcare |
|---|---|
| Model | Optima XR200amx |
| Generator Power | 32 kW |
| Exposure Time Range | 1 ms - 10 s |
| X-Ray Tube Focal Spot | Dual |
| Focal Spot Size | 0.6 mm / 1.2 mm |
| Detector Type | Flat panel detector |
| kV Range | 40 - 125 kV |
| Tube Voltage Range | 40 - 125 kV |
| Image Acquisition Time | <5 seconds |
Identifies electrical, pneumatic, hydraulic, and other energy sources in the system.
Details the process for safely isolating energy sources before servicing equipment.
Explains ESD risks and prevention methods for sensitive electronic components.
Provides a step-by-step workflow for installing the system, including unpacking and testing.
Procedures for performing electrical ground resistance and leakage current tests.
Steps for unpacking, inspecting, connecting, and registering the digital detector.
Guides users through the System Configuration Tool (SUIF) for system setup.
Procedures for configuring DICOM network connections to hosts and printers.
Instructions for installing optional hardware components like barcode readers and DAP meters.
Procedures for testing PACS image display characteristics and burn/no-burn configurations.
Steps to perform a detector check to ensure proper operation and image quality.
Information on certified components and the location of their rating plates for compliance.
Final steps to prepare the system for customer operation and complete documentation.
To Next Page