GE HEALTHCARE OPTIMA XR200AMX/XR220AMX
D
IRECTION 5336113-1EN, REVISION 10 INSTALLATION MANUAL
Chapter 4 Configuration Page 67
Section 4.3 Changing Auto Protocol Assist settings
Contact a GE service representative to change Auto Protocol Assist settings.
Section 4.4 DICOM connectivity configuration
Follow the procedures in this section to configure DICOM connectivity to network hosts and printers.
After successful configuration, use the tables below to capture the system’s DICOM connectivity
configuration for future reference. Store the worksheets in a secure location at the site.
4.4.1 Network host configuration
4.4.1.1 Adding network hosts
This section provides instructions for setting the system preferences for network host connections.
1. Turn on the system.
2. On the Applications desktop, press the UTILITIES
button.
3. On the Utilities desktop, next to Network Connections, press EDIT
.
4. On the Network Connections window, in the Network Hosts section, press ADD
.
The Add Network Host screen appears.
Port Number Port number used to communicate with primary audit server.
Protocol
Protocol used to communicate with primary audit server (TCP,
UDP).
Send Test Message Test connection with primary audit server.
Enterprise Repository 2 On or Off.
Host Name/IP Secondary audit server name or IP.
Port Number Port number used to communicate with secondary audit server.
Protocol Protocol used to communicate with secondary audit server.
Send Test Message Test connection with secondary audit server.
Local Repository tab
On/Off Radio buttons.
Refresh Button to refresh the list.
Event ID / Time / Event
Outcome
Headers for list of messages.
Display Raw XML Display the raw data file to the user.
Table 4-11 Secure Login options
Option Description
To Next Page
Loading...
