GE Healthcare Optima XR200amx - Removing Network Hosts; Printer Configuration; Adding Printers

GE HEALTHCARE OPTIMA XR200AMX/XR220AMX
D
IRECTION 5336113-1EN, REVISION 10 INSTALLATION MANUAL
Page 70 Section 4.4 DICOM connectivity configuration
1. On the Applications desktop, press the UTILITIES button.
2. On the Utilities desktop, next to Network Connections, press EDIT
.
3. On the Network Connections window, in the Network Hosts section, select the network host
connection to test, and press C-ECHO TEST
.
A message appears saying whether the test passed or failed.
- A “passed” message means that the network host is working and that exams can be
retrieved from or transferred to it.
- A “failed” message means that the system could not contact the network host. Perform
the following tasks to resolve the problem:
* Re-try the test at a later time. The host may be temporarily unavailable.
* Confirm the host configuration on the Edit screen. (On the Network Connections
window, in the Network Hosts section, select the network host connection to verify,
and press EDIT
.
If the problem persists, contact the technical support group or system administrator.
4.4.1.3 Removing network hosts
Follow these instructions to remove a network host.
1. On the Applications desktop, press the UTILITIES
button.
2. On the Utilities desktop, next to Network Connections, press EDIT
.
3. On the Network Connections window, in the Network Hosts section, select the network host
connection to delete, and press REMOVE
.
A message appears saying “Are you sure you want to remove (host name)?”
4. Press YES
to remove the network host connection.
4.4.2 Printer configuration
Printer connections are available only on the Optima XR220amx or Optima XR200amx with digital
upgrade system.
4.4.2.1 Adding printers
This section provides instructions for setting the system preferences for printer connections.
1. Turn on the system.
2. On the Applications desktop, press the UTILITIES
button.
3. On the Utilities desktop, next to Network Connections, press EDIT
.
4. On the Network Connections window, in the DICOM Printers section, press ADD
.
The Add Printer screen appears.
5. On the Add Printer window, on the Printer tab, enter the appropriate values in the fields listed
below.