Need help?Do you have a question about the GE Optima IGS 320 and is the answer not in the manual?
General| Type | Mobile C-arm |
|---|---|
| Detector Type | Flat Panel Detector |
| Imaging Modes | Fluoroscopy, Cine |
| Frame Rate | 30 fps |
| Power Requirements | 220-240 V, 50/60 Hz |
Outlines the responsibilities of the purchaser and customer during installation.
Details shipping information, including dimensions and methods for components.
Specifies limits and conditions for storing and handling the product.
Describes the various components that make up the Optima system.
Details room dimension requirements and layout drawings for installation.
Provides critical dimensional drawings for system components for site planning.
Specifies structural needs for installation, focusing on floors and walls.
Details floor loading, mounting methods, and component installation requirements.
Addresses seismic considerations for anchoring cabinets and components to floors and walls.
Details electromagnetic compatibility standards and requirements for the system.
Outlines requirements for installation environment and control measures.
Specifies acceptable ranges for humidity and temperature for system operation.
Covers nominal voltage, frequency, power consumption, and input types.
Details physical runs, core matrix, and cable channeling for system interconnects.
Details network connection requirements, including broadband modem and Ethernet.
Outlines the process for obtaining IP addresses for system components.
Provides a specific procedure for connecting US Fluoro UPS and PDB.
To Next Page