GE Optima IGS 320 - 2285048 - Base Plate Assembly

3.3.3.1 2285048 - Base Plate Assembly
Table 2-11:
Item Name Part # Description Quan. Notes
Base plate 2285059 12 Hole Floor Base plate 1 pc
Lift Plate 2290939 Lifting Straps 2 pc
Hex Head
Screw
5166535 Hex Head Screw 1/2”-13UNC L1
1/2” 12.9 Black
2 pc
Grease 2295599 Lithium grease lubricant 100g 2 pc
Doc 2230112-1-100 Vascular Gantry Base plate and
Table
1 pc
Doc 2229297-100 LCA/LCV+/LC+ System Base
plate and Omega IV/V/EP Table
Floor Preparation
1 pc
Doc 5421635-1-1EN Pre-Installation Kit Install Proce‐
dure
1 pc
NOTE: The 12 LC base plate mounting screws are delivered with the system's LC Gantry.
These screws are:
•
cap screws 5166774; Screw Socket Head Cap 1/2”-20 UNF L1 1/2” 12.9 Black
(used when installing new system on old base plate (US threads))
•
cap screws 2300939; Hex Head Cap screw; M12 40/40 Class 12.9 Black ; used to
attach L-brackets on table shipping pallet to positioner dolly for table positioning
(used when the new base plate is metric threads)
Optima IGS 320, Optima IGS 330 Pre-Installation Manual
Direction 5537562-1-1EN, Revision 3
124 3 Room Structural Requirements