12 49-1000418 Rev. 6
Side Tank Accessory
NOTE:TherearetwodraintubeslocatedonthebackofyourOpalNuggetIceMakerindicatedasdraintubeAandB
in the illustration on page 12.
1.HandWashOnly:RinseandhandwashOpalSide
Tankwithwarmwaterandamilddishsoap.Remove
OpalSideTank’scapandwashthecapandrubber
valvewithwaterandamilddishsoap.TheSideTank
base can be washed by disconnecting the hose and
addingasmallamountofsoapywatertoit.Scrubas
needed and rinse thoroughly. The rinse water should
drain out the port in the back.
Rinsethecap,rubbervalve,tankandthebasewellto
remove any residual soap (see illustration).
DO NOT WASH THE SIDE TANK IN THE
DISHWASHER.
2.UnplugOpalNuggetIceMaker.UnhookOpal’sdrain
tubes and drain the water from the reservoir.
3.Connectdraintube,labeledB,tothebackofOpalSide
Tank’s base.
4. Make sure drain tube (A) is connected to the black
hanger and installed on the back of Opal.
5.Makesuredraintube(B)connectingtotheSideTank
isrestingflatonthecountertop.
SideTank
Cap and
Valve
Unplugthis
draintube(B)
from the black
hanger and
connect this
tube to the
SideTank.
Plug drain
tubeBintothe
side tank here.
BA
SIDE TANK ACCESSORY
NOTE: The Side Tank Accessory is only included with model number
OPAL01GEPKT.